180A Brushless 5065 6354 motor RC Car ESC 2-6S electric Skate Scooter/Skateboard | Игрушки и хобби

180A Brushless 5065 6354 motor RC Car ESC 2-6S electric Skate Scooter/Skateboard | Игрушки и хобби

Our FVT Car ESC's are a truly awesome ESC at an amazing price.  They are 2-6S LiPo capable (yes you read that right, 6S capable), water-resistant for use on wet surfaces and easily programmable with an LCD Program Card or USB Link.  Sensor port for use with sensored motors (works with sensorless motors too).  They come pre-wired with 10AWG silicone wire on the ESC, and bare, tinned ends for adding connectors of your choice.   With smooth start-up, a built in switching BEC and a powerful built-in cooling fan these are the perfect ESC to power your 1/8 scale car or truck.       FEATURES:       Water-resistant and dustproof     Powerful built-in switching BEC (SBEC)     Excellent start-up, acceleration and linear operation     Sensor port for use with sensored motors (works with sensorless motors too).     Several programmable items to suit any driving condition/driver     Electric brake function, also compatible with mechanical brakes     Multiple protection features: Low-voltage cut-off protection, Over-heat protection, Throttle-signal loss protection     Easily programmed with LCD Program Card or USB Link     ESC firmware can be updated through USB port of program card or with USB link     Tough outer case with flat bottom for easy, sturdy mounting to vehicle       SPECS:       Output: Continuous 180A, Burst 1260A     Input: 6-18 Cells NiMH/NiCd or 2-6S LiPo     BEC Output: 5V/6V/7.4V/8V@9A (Switching Mode)     Motor Supported: Sensored/Sensorless Brushless Motor     Resistance: 0.0002ohm     Suitable Motors: Brushless sensored/sensorless KV<=2500     Suitable Car: 1/8     Size: 64.8mm(L) x 41.8mm(W) x 42.8mm(H)     Weight: 112g (without wires)